Parameter Bar Code Scanning; Beep After Good Decode - Motorola DS9208 Product Reference Manual

4 - 6 DS9208 Product Reference Guide

Parameter Bar Code Scanning

Parameter # ECh
To disable the decoding of parameter bar codes, including the Set Defaults parameter bar codes, scan the
Disable Parameter Scanning bar code below. To enable decoding of parameter bar codes, scan Enable
Parameter Scanning.
*
Enable Parameter Bar Code Scanning

Beep After Good Decode

Parameter # 38h
Scan a bar code below to select whether or not the digital scanner beeps after a good decode. If selecting Do
Not Beep After Good Decode, the beeper still operates during parameter menu scanning and to indicate
error conditions.
*
Beep After Good Decode
(01h)
(Enable)
(01h)
Disable Parameter Bar Code Scanning
(00h)
Do Not Beep After Good Decode
(Disable)
(00h)