Imaging Preferences; Operational Modes - Motorola DS9208 Product Reference Manual

5 - 4 DS9208 Product Reference Guide

Imaging Preferences

The parameters in this chapter control image capture characteristics. Image capture occurs in all modes of
operation, including decode and snapshot.

Operational Modes

The digital scanner has two modes of operation:
•
Decode Mode
•
Snapshot Mode.
Decode Mode
By default, when you pull the trigger the digital scanner attempts to locate and decode enabled bar codes
within its field of view. The digital scanner remains in this mode until it decodes a bar code or you release the
trigger.
Snapshot Mode
Use Snapshot Mode to capture a high-quality image and transmit it to the host. To temporarily enter this mode
scan the Snapshot Mode bar code. While in this mode the digital scanner blinks the green LED at 1-second
intervals to indicate it is not in standard operating (decode) mode.
In Snapshot Mode, the digital scanner turns on its laser aiming pattern to highlight the area to capture in the
image. The next trigger pull instructs the digital scanner to capture a high quality image and transmit it to the
host. A short time may pass (less than 2 seconds) between when the trigger is pulled and the image is
captured as the digital scanner adjusts to the lighting conditions. Hold the digital scanner steady until the image
is captured, denoted by a single beep.
If you do not press the trigger within the Snapshot Mode Timeout period, the digital scanner returns to Decode
Mode. Use Snapshot Mode Timeout on page 5-6
seconds.
To disable the laser aiming pattern during Snapshot Mode, see
Snapshot Mode
to adjust this timeout period. The default timeout period is 30
Snapshot Aiming Pattern on page 5-6.