Auto Setup - Sony DHG-HDD250 Operation Manual

Operating Instructions

Auto Setup

Before you can enjoy the TV Guide On Screen, you will need to perform the Auto Setup.
1
When your HD DVR is first powered on, the set up screen will automatically appear.
✍
If you do not see any image, check the connections to the TV. Also check the FORMAT setting by
pressing the FORMAT button until the Front Panel Window displays a Format setting that is
compatible with your TV and TV connections (see page 75 for more information about Format
settings).
2
Follow the on screen set up, selecting the types of signals your HD DVR will receive.
✍
The TV Guide On Screen system setup must be completed before using other features of the HD
DVR.
3
The HD DVR will automatically search for available stations. This may take more than 10
minutes depending on the number and types of channels available. After the auto set up
is completed, the TV Guide On Screen system set up screen appears.
4
Enter your country, zip code and indicate again which types of signals your HD DVR will
receive. You may also select to allow an external VCR to be controlled by your HD DVR.
5
After the TV Guide set up is complete, Listings information will not immediately be
available. Make sure to turn the HD DVR off overnight and you will begin to see program
guide information appear for your area within 24 hours.
✍
To continue receiving listings turn off your HD DVR overnight or when not in use.
30