Connecting Additional Equipment - Sony DHG-HDD250 Operation Manual

Connecting Additional Equipment

Connecting a DVD Recorder or VCR
1
Connect your HD DVR's composite A/V output to your DVD recorder/VCR's composite
A/V input using the composite A/V cable (supplied).
✍
If your DVD or VCR recorder is equipped with an S Video jack, use the S Video cable to connect to the
HD DVR instead of the composite video cable for better picture quality.
✍
If your DVD recorder is equipped with a component video input (Y,P
cable instead of the yellow composite or S Video cables. When using the component video cable to
connect to a DVD Recorder, the FORMAT setting should be set to either 480i or 480p depending on
which formats the DVD Recorder can accept. For more information on the FORMAT feature see
page 75.
2
Connect the IR Blaster to your HD DVR's G-LINK jack, then place the IR Blaster below
and in front of the VCR, about 1/2 " to 1". For best results, place the IR Blaster directly
below the VCR's IR receiving area.
✍
If the IR Blaster does not seem to be working correctly, check that the IR Blaster is positioned directly
below the VCR's IR receiving area.
Connections
,P ), use the component video
B R
25