Operation; Operating Controls - Sennheiser Evolution EW100 Instruction Manual

66
6

Operation

Transmitters and receivers of the Sennheiser evolution wireless series ew 100
have been factory-preset to allow immediate use after switch-on (
paring the devices for use"). Please note, however, that the transmitter
sensitivity is dependent on the application. To avoid overmodulation and
distortion, please first check whether the preset sensitivity is suitable for
your particular application (

Operating controls

Press the
ON/OFF
ON/OFF
switch the transmitters and receivers on or off.
POWER
MUTE Use the MUTE
without switching off the transmitter.
SET Press the SET button
– to select a menu,
– to change to the next menu,
– to return to the top menu level.
Press the UP button
– to adjust the setting of a menu.
Press the DOWN
– to adjust the setting of a menu.
"Adjusting the sensitivity").
button or the
POWER
switch (transmitters only) to noiselessly mute the audio signal
button
button (EM 100 receiver only) to
"5 Pre-