Sony HCD-GNV99D Service Manual page 23

[TUNER STEP CHANGE]
• The step interval of AM channels can be toggled between 9 kHz
and 10 kHz.
Procedure:
1. Press button to turn the set ON.
?/1
2. Press [TUNER/BAND] button to select the "AM".
3. Press button to turn the set OFF.
?/1
4. Press [ENTER] button and
will power ON automatically. The message "AM 9k STEP" or
"AM 10k STEP" appears on the fluorescent indicator tube and
thus the channel step is changed.
[DVD SHIP MODE (WITH MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable to
vibration and clears all data including preset data stored in the
RAM to initial conditions. Use this mode when returning the
set to the customer after repair.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select DVD function.
button, [DVD] button and
3. Press
x
simultaneously. The set will power off automatically.
4. After the "STANDBY" blinking display finish, a message
"MECHALOCK" is displayed on the fluorescent indicator tube
and the DVD ship mode is set.
[DVD SHIP MODE (WITHOUT MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable to
vibration.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select DVD function.
3. Press [DVD] button and
?/1
will power off automatically.
4. After the "STANDBY" blinking display finish, a message
"MECHALOCK" is displayed on the fluorescent indicator tube
and the DVD ship mode is set.
[DVD TRAY LOCK MODE]
• This mode let you lock the disc tray. When this mode is
activated, the disc tray will not open when [OPEN/CLOSE]
button or [EX-CHANGE/DISC SKIP] button is pressed. The
message "LOCKED" will be displayed in on the fluorescent
indicator tube.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select DVD function.
button and [OPEN/CLOSE] button simultaneously
3. Press
x
and hold down until "LOCKED" or "UNLOCKED" displayed
on the fluorescent indicator tube (around 5 seconds).
[VIDEO/SAT SWITCHING]
• This mode let you switch from VIDEO to SAT and vice-versa.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select TV/SAT function.
3. Press [TV/SAT] button and
function will change to SAT. Press the same buttons again to
change from SAT to VIDEO.
button simultaneously. The set
?/1
button
?/1
button simultaneously. The set
button simultaneously. The
?/1
HCD-GNV99D/GNV111D
[DVD COLOR SYSTEM SWITCHING]
• This mode let you change the color system of the video output
from PAL to NTSC or vice-versa.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select DVD function.
3. Press button to turn the set OFF.
?/1
4. Press [PAUSE] button and
will power on automatically.
5. The message "COLOR PAL" or "COLOR NTSC" will be
displayed on the fluorescent indicator tube.
[REMOTE COMMANDER DISABLE MODE]
• This mode let you disable the remote commander reception. When
this mode is activated, the set will not response if the button on
the remote commander is pressed. The message "RemoteDisable"
will be displayed on the fluorescent indicator tube. Use this mode
during aging to avoid disturbance.
Procedure:
1. Press button, [GROOVE] button and [DISC 2] button
x
simultaneously, "RemoteDisable" displayed on the fluorescent
indicator tube. To enable the remote commander reception, press
the same buttons again.
"RemoteEnable" displayed on the fluorescent indicator tube.
button simultaneously. The set
?/1
23