Fujitsu AB*14LBAJ Service Instruction page 19

5-4 Wall Mounted (AS*18/ 24L) type
1. VERTICAL LOUVER CONTROL
(Function Range)
Each time the button is pressed, the air direction range will change as follow:
(Operation Range)
Cooling / Dry mode
Heating mode
The remote control unit's display does not change.
Direction
Only the direction of the Moving Diffuser changes: the direction of the Air Direction Flaps does not change.
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown,
in accordance with the type of operation selected.
Cooling / Dry mode
Heating mode
During AUTO mode operation, for the first minute after beginning operation,
airflow will be horizontal
1-2. SWING OPERATION
When the swing signal is received from the remote controller, the vertical louver starts to swing.
The range of swing depends on the set airflow direction.
(Swinging Range)
Airflow direction set
1
2
3
4
5
6
When the indoor fan is either at S-Lo or Stop mode, the swinging operation is interrupted
and the louver stops at the memorized position.
( Stop mode means Operation stop.)
Horizontal flow
Downward flow
; the air direction cannot be adjusted during this period.
Range of swing
to
1 4
to
1 4
1 to 4
to
3 5
to
4 6
1 to 6
01-16
(Air Direction Range)