Sanyo
ICR-B220 Instruction Manual page 12

VAS: Selecting Voice Activated System mode
OFF: To start and stop recording manually
ON: Recording begins when the microphone picks up sound, and stops
automatically after the sound stops. "VAS" appears.
Press the F or E button to set the microphone's sensitivity
when recording begins. The VAS sensing level appears on the
display. "VAS 0"
Low
REC TIME: Selecting recording time mode
LP: For long time recording
SP: For standard recording
HQ: For high-quality recording (Initial Setting)
XHQ: For extra high-quality recording
REC
TIME
64MB
LP 8 hr. 20 min.
SP 4 hr. 10 min.
HQ 3 hr. 0 min.
XHQ 2 hr. 0 min.
Recording time in the table shows rough standard time. It will be different
somewhat depending on SD Card.
Note:
• Setting or changing recording time can be used for a new file recording.
When overwrite or insertion recording starts on the recorded file, it follows
the file's recording time.
• When "XHQ" mode is selected, "XHQ" segment does not appear on the
display.
11
"VAS 10"
High
Recording Time (approx.)
128MB
17 hr. 20 min.
8 hr. 40 min.
6 hr. 15 min.
4 hr. 15 min.
256MB
34 hr. 40 min.
17 hr. 20 min.
12 hr. 30 min.
8 hr. 30 min.