Alignment And Adjustment; Reference; Location Of Adjustment Button Of Remote Control - Sony SLV-SE230 Service Manual

5. ALIGNMENT AND ADJUSTMENT

5-1 REFERENCE

1) X-Point (Tracking center) adjustment, "Head switching adjustment" and "NVRAM option setting" can be adjusted with remote control.
2) When replacing the Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the "Head switching adjustment" and
"NVRAM option setting".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) How to adjustment.
- Press the "TEST" button on Main PCB/Function PCB to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- If the adjustment is completed, be sure to turn the power off.

5-1-1 Location of adjustment button of remote control

SINGLE
X-Point (Tracking Center) Adjustment
("5" Button)
Head Switching Adjustment
("SP/LP" Button)
NVRAM Option Setting
("MENU" Button)
Fig. 5-1
5-1
SLV-SE230/SE430/SE630/SE730/
SE737/SE830/SX730/SX737
MULTI