Presetting Channels; Changing/Disabling Programme Positions - Sony SLV-SE230 Service Manual

Presetting channels

If some channels could not be preset using the Auto Set Up function, you can preset
them manually.
Before you start...
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to "Index to parts and controls" for button locations.
1 Press MENU, then press M/m/</
MENU
, to highlight INSTALLATION
and press OK.
OK
2 Press M/m to highlight MANUAL
SET UP, then press ,.
OK
3 Press M/m to highlight the row
which you want to preset, then press
,.
OK
To display other pages for
programme positions 6 to 80, press
M/m repeatedly.
28 Presetting channels
If the picture is not clear
If the picture is not clear, you may use the Manual Fine Tuning (MFT)
function. After step 4, press M/m to select MFT. Press </, to get a clear
picture, then press MENU to exit the menu.
Tips
• To set the programme position for the decoder, see "Setting the Canal Plus
decoder" on page 36.
• The VCR must receive channel information for station names to appear
automatically.
Notes
• If the TV sound is distored or noisy, select the appropriate TV system ("G" or "K")
for your area (see page 23).
• When adjusting MFT, the menu may become difficult to read due to interference
from the picture being received.
30 Presetting channels
AUTO SET UP
MANUAL SET UP
SMARTLINK
TV SYSTEM : G
VCR OUTPUT CH : 3 2
SELECT : SET :
END : OK EXIT : MENU
TV STATION TABLE
PR CH NAME DEC
1 0 2 7 A A B – OFF
2 0 2 9 L M N – OFF
3 0 3 0 C D E – OFF
4 0 3 2 I J K – OFF
5
SWAPPING : OK
DELETE : CLEAR EXIT : MENU
MANUAL TUNING
PR : 5
CH : – – –
MFT : –
DECODER : OFF
NAME : – – – –
SELECT : SET :
END : OK EXIT : MENU
1-7
4 Press </, repeatedly until the
channel you want is displayed.
OK
5 Press M/m to highlight NAME, then
press ,.
OK
6
Enter the station name.
1 Press M/m to select a character.
Each time you press M, the
OK
character changes as shown
below.
A t B t ... t Z t 0 t 1 t
... t 9 t A
2 Press , to set the next
character.
The next space is flashed.
To correct a character, press </, until the character you want
to correct is flashed, then reset it.
You can set up to 4 characters for the station name.
7
Press OK to confirm the station name.
OK
8
Press MENU to exit the menu.
MENU

Changing/disabling programme positions

After setting the channels, you can change the programme positions as you like. If
any programme positions are unused or contain unwanted channels, you can disable
them.
You can also change the station names. If the station names are not displayed, you can
enter them manually.
Changing programme positions
Before you start...
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to "Index to parts and controls" for button locations.
1 Press MENU, then press M/m/</
MENU
, to highlight INSTALLATION
and press OK.
OK
2 Press M/m to highlight MANUAL
SET UP, then press ,.
OK
3 Press M/m to highlight the row
containing the programme position
you want to change.
OK
To display other pages for
programme positions 6 to 80, press
M/m repeatedly.
MANUAL TUNING
PR : 5
CH : 0 3 3
MFT : –
DECODER : OFF
NAME : – – – –
SELECT : SET :
END : OK EXIT : MENU
MANUAL TUNING
PR : 5
CH : 0 3 3
MFT : –
DECODER : OFF
NAME : – – – –
SELECT : SET :
END : OK EXIT : MENU
MANUAL TUNING
PR : 5
CH : 0 3 3
MFT : –
DECODER : OFF
NAME : O– – –
SELECT : SET :
END : OK EXIT : MENU
continued
Presetting channels 29
AUTO SET UP
MANUAL SET UP
SMARTLINK
TV SYSTEM : G
VCR OUTPUT CH : 3 2
SELECT : SET :
END : OK EXIT : MENU
TV STATION TABLE
PR CH NAME DEC
1 0 2 7 A A B – OFF
2 0 2 9 L M N – OFF
3 0 3 0 C D E – OFF
4 0 3 2 I J K – OFF
5
SWAPPING : OK
DELETE : CLEAR EXIT : MENU
TV STATION TABLE
PR CH NAME DEC
1 0 2 7 A A B – OFF
2 0 2 9 L M N – OFF
3 0 3 0 C D E – OFF
4 0 3 2 I J K – OFF
5
SWAPPING : OK
DELETE : CLEAR EXIT : MENU
continued
Changing/disabling programme positions 31