Alignment And Adjustment; Reference; Location Of Adjustment Button Of Remote Control; Test Point Location For Adjustment Mode Setting - Sony SLV-SE210B Service Manual

SLV-SE210B/SE210D/SE210G/SX110A/SX110B
Q Q
3 7 6 3 1 5 1 5 0

ALIGNMENT AND ADJUSTMENT

5-1. Reference

1) X-Point (Tracking center) adjustment, "Head switching adjustment" and "NVRAM option setting" can be adjusted with remote control.
2) When replacing the Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the "Head switching adjustment" and
"NVRAM option setting".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) How to adjustment.
- Press the "SW718" button on Main PCB to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- If the adjustment is completed, be sure to turn the power off.

5-1-1. Location of adjustment button of remote control

Head Switching Adjustment
("SP/LP" Button)
X-Point (Tracking Center) Adjustment
("5" Button)
T E
L 1 3 9 4 2 2 9 6 5 1 3
NVRAM Option Setting
("MENU" Button)
w w w
SECTION 5
1 2 3
4 5 6
7 8 9
0
Fig. 5-1
x a o
. i
5-1
http://www.xiaoyu163.com

5-1-2. Test point location for adjustment mode setting

Q Q
3 7 6
u 1 6 3
y
http://www.xiaoyu163.com
2 4
8 9 9
3 1 5 1 5 0 8 9
Fig. 5-2 Main PCB (Top View)
m
c o
.
5-2
2
8 9 9
2 4 9 8 2 9 9
PRESS