Display Stamping; Camera Name Stamping; Time Stamping; Display Milliseconds - Bosch FLEXIDOME corner 9000 MP Software Manual

36 en | Advanced General Settings
6.4

Display Stamping

Various overlays or stamps in the video image provide
important supplementary information. These overlays can be
enabled individually and arranged on the image in a clear
manner.
6.4.1

Camera name stamping

Select the position of the camera name overlay in the drop-
down box. It can be displayed at the Top, at the Bottom, or at a
position of choice using the Custom option, or it can be set to
Off for no overlay information.
If the Custom option is selected, enter values in the X and Y
position fields.
6.4.2

Time stamping

Select the position of the time and date overlay in the drop-
down box. It can be displayed at the Top, at the Bottom, or at a
position of choice using the Custom option, or it can be set to
Off for no overlay information.
If the Custom option is selected, enter values in the X and Y
position fields.
6.4.3

Display milliseconds

If necessary, display milliseconds for Time stamping. This
information can be useful for recorded video images; however,
it does increase the processor's computing time. Select Off if
displaying milliseconds is not needed.
6.4.4

Alarm mode stamping

Select On in the drop-down box for a text message to be
displayed in the event of an alarm. It can be displayed at a
position of choice using the Custom option, or it can be set to
Off for no overlay information.
If the Custom option is selected, enter values in the X and Y
position fields.
AM18-Q0649 | v5.8 | 2013.06 Software manual
Camera Browser Interface
Bosch Security Systems