Checking Fuel Pressure - PEUGEOT Geopolis 250 Workshop Manual

Checking fuel pressure

- Remove the tank cover panel. See:
Procedure 3. page 19.
- Carry out the procedure for lowering the
pressure in the fuel system. See:
Procedure 7. page 33.
- Disconnect the fuel supply hose.
- Insert the pressure gauge P/N 757877
between the gauge well and the supply
hose.
- Always use hose clamps that are in good
condition.
- Turn the ignition on 3 times to bleed the fuel
system.
- With the engine stopped, check the fuel
pressure which must be 2.5 bars when
switching on the fuel pump.
Before disconnecting the pressure gauges, lower the fuel pressure in the fuel system.
Always reinstall the hoses with new hose clamps.
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
MISCELLANEOUS OPERATIONS
33