Daikin Super multi NX E Series Service Manual page 173

SiBE121135_A
5. Press the [TEMP]
6. Diagnose by the sound.
7. Determine the error code.
8. Press the [MODE] button to exit from the diagnosis mode.
9. Press the [ON/OFF] button twice to return to the normal mode.
Note: When the remote controller is left untouched for 60 seconds, it returns to the normal mode.
Service Diagnosis
or
beep : The left-side number does not correspond with the error code.
two consecutive beeps : The left-side number corresponds with the error code but the
long beep : Both the left-side and right-side numbers correspond with the error code.
The numbers indicated when you hear the long beep are the error code.
Error codes and description
The display means the trial operation mode.
Refer to page 246 for trial operation.
button and change the number until you hear the long beep.
right-side number does not.
→
Refer to page 167.
Service Check Function
(R4277)
(R4278)
(R14969)
(R9670)
162