Positioning / Installation Dimensions - Wolf TSW-120 Installation Instructions Manual

Positioning
Installation of wall hung
appliance an hot water
storage tank
TSW without covering panel
480
344
400
notch for water pipes
Please note when using
the pipe cover:
Installation instructions DHW cylinders TSW-120/CSW-120
3048420_0707

Positioning / Installation dimensions

Install the DHW cylinder only in a frost protected location, otherwise
drain, if there is a risk of frost.
Consider the total weight of a full DHW cylinder when selecting
the installation location.
Adjustable feet allow you to compensate for uneven floors.
The DHW cylinder ...SW-120 may be installed in a top or bottom
cupboard or free-standing.
centered!
TSW with covering panel
mounting
bracket
Install appliance as described in Installation Instructions.
The installation dimensions apply to TSW-120 as well as CSW-120.
If you intend installing the DHW cylinder with a pipe cover, check the
fit (dimension 300 mm) with the pipe cover prior to commencing the
pipe installation. The adjustable cylinder feet can compensate a
max. of ±10 mm.
Please note the fixing hole position on the installation template
when using a fixing bracket (accessory).
CSW
480
344
400
notch for water pipes
mounting
bracket
notch for
water
pipes
mounting
bracket
7