Installation Of The Tundish - Wolf TSW-120 Installation Instructions Manual

Installation of the pipes
domestic water
connecting set
tundish
DO NOT USE THIS TUNDISH
WITH THE P+T-VALVE
hold a distance of 25mm
between the tundish and the
pipe end.
Installation instructions DHW cylinders TSW-120/CSW-120
3048420_0707

Installation of the tundish

The discharge pipe from the tundish should terminate in a safe
place where is no risk to person in the vicinity of the discharge.
Position the tundish where it can be readily seen.
Position the tundish away from any electrical devices.
Between storage tank and safety valve no other valves
or sieves must be installed.
passed expansion
vessel
always use copper
inserts
wall plug Ø 10mm
threaded rod 8 x
160
wall mounted pipe clip
reduce
compression
fitting 22/18
plug
pressure
reducing
domestic
valve
cold
water
expansion
valve with
check
valve
11