Table of Contents
Advertisement
1. Center rear close clearance shield with back of stove. Mark rear of stove, using reference
holes in rear shield. Using self-tapping screws, drill four holes in locations marked. Re-
move screws and attach rear shield to back of stove. see figure 11A.
2. Insert front end of side shield behind side angle on front side of stove. Align top of side
shield with top of rear shield. Mark holes on rear shield thru holes in rear of side shield. Us-
ing four self tapping screws drill four holes in the locations marked. Tighten bottom screws
and leave top screws loose for step 3. Use same step to install side shield on the opposite
side of stove. See figure 11B.
3. Loosen two top screws holding side shield at rear top. Insert pipe shield where back shield
and top rear side shield meets. Tighten screws. see figure 11C.
REAR CLOSE
CLEARANCE SHIELD
C L
INSTALLATION OF (OPTIONAL)
CLOSE CLEARANCE SHIELDS
Figure 11A
PIPE SHIELD
Keep rear / side
Shields even
Figure 11C
Page 26
SIDE SHIELD'S
Side angle on
Figure 11B
front side of
stove.
Advertisement
Table of Contents
