Maintenance Information - E-TON sport 50 Service Manual

E-TON
PRECAUTIONS IN OPERATION .......2-1
PERIODICAL MAINTENANCE
SCHEDULE ........................................2-2
LUBRICATION SYSTEM ....................2-3
FUEL SYSTEM...................................2-4
AIR CLEANER....................................2-5
THROTTLE VALVE OPERATION ......2-5
VALVE CLEARANCE INSPECTION &
ADJUSTMENT....................................2-6
CARBURETOR IDLING SPEED
ADJUSTMENT ..................................2-7
IGNITION SYSTEM/SPARK PLUG ..2-8
PRECAUTIONS IN OPERATION
Specification
Fuel Tank Capacity
Engine Oil
Transmission Gear oil
Clearance of throttle valve
Spark plug
"F" Mark in idling speed
Full timing advanced
Idling speed
Cylinder compression pressure
Valve clearance: IN/EX
Tire dimension
Tire pressure (cold)
Battery
Play of drum brake lever

2. MAINTENANCE INFORMATION

Main
auxiliary
capacity
change
capacity
change
front / rear
single
Two persons
YTX7A-BS 12V6Ah (MF battery)
CYLINDER COMPRESSION
PRESSURE........................................ 2-9
DRIVING SYSTEM............................. 2-9
STEERING SYSTEM ......................... 2-10
SUSPENSION SYSTEM .................... 2-10
FRONT DISK BRAKE SYSTEM ......... 2-11
DRUM BRAKE SYSTEM .................... 2-13
WHEEL/TIRE...................................... 2-14
BATTERY ........................................... 2-15
HEADLIGHT ADJUSTMENT .............. 2-15
NUTS BOLTS TIGHTEN.................. 2-15
5200 c.c.
1500 c.c.
850 c.c.
750 c.c.
110 c.c.
100 c.c.
2~6 mm
TORCH D7RC Gap: 0.6~0.7 mm
Before TDC 13º / 2200 rpm
Before TDC 26º / 8000 rpm
2100±100 rpm
11.8±0.4:1 kg/cm²
0.06±0.02 mm
120/70-12 / 130/70-12
Front: 2.00 kg/cm² rear: 2.00 kg/cm²
Front: 2.00kg/cm² rear: 2.25 kg/cm²
10~20 mm
2-1