E-TON sport 50 Service Manual page 145

E-TON 14. STEERING/FRONT WHEEL/FRONT SHOCK ABSORBER
Inspection
Wheel axle
Set the axle in V-blocks and measure the
run-out.
Service limit: 0.2 mm.
Wheel axle
Wheel Rim
Place the wheel onto a rotated bracket.
Turn the wheel with hand and measure its
wobble value with a dial gauge.
Service limit:
Radial : 2.0 mm
Axial : 2.0 mm
Disassembly
Remove 3 hex socket bolts and brake disc.
Speedometer gear dust seal
Remove the left axle ring and dust seal.
Remove the dust seal on the right side of
speedometer gear.
Bearing spacer
Remove the bearing with the inner type
bearing remover.
Bearing
Take out the bearing spacer and then
remove the other bearing.
Tool:
Bearing
Inner type bearing remover
Dust seal
Wheel side collar
14-5