Silencing The Diesel Sound - Lionel Junction Dinosaur Diesel LionChief Ready-To-Run Set Owner's Manual

Operating your train set

Silencing the diesel sound

U
se the sound switch on the rear of the locomotive to turn on the diesel sound. Refer to Figure 6.
To silence the background diesel sounds, slide the SND switch to the OFF position under the
frame. Turn off track power for about two seconds, and then the background sound will be silenced
when the track power is restored. The horn, announcement, and bell sounds can still be triggered at
any time using the remote. To restore the background sounds, simply slide the SND switch to the ON
position and then turn off track power for two or more seconds.
Always turn off track power for about two seconds after you slide the switch. The
Note!
background sounds will be reset according to the new switch position when the
track power is switched on again.
Sound switch
ON
OFF
Rear of
the locomotive
Figure 6. Switch locations
13