Running Your Train Set - Lionel Junction Dinosaur Diesel LionChief Ready-To-Run Set Owner's Manual

Operating your train set

Running your train set

With track power unplugged, place your train set on the track.
1
Refer to the following section for information on coupling the cars.
Plug in your wall-pack power supply, connect
2
it to the track, and switch on the remote.
Move 'em out!
3
Use your remote to run your train. You can adjust the speed
in forward or reverse, blow the whistle, sound the bell, or trigger an
announcement. Refer to page 12 for complete details.
Unplug the wall-pack power supply when you are done
4
running your trains.
Switch off your remote control to conserve the batteries.
11