1. Manuals
  2. Brands
  3. ETIC Manuals
  4. Network Router
  5. IPL-3G
  6. User manual

ETIC IPL-3G User Manual

Etic umts gprs edge ip router - ras - firewall
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IPL-3G
UMTS GPRS EDGE
IP Router - RAS - firewall
_________________
USER GUIDE
Document reference : 9019409-01
_________________

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IPL-3G and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ETIC IPL-3G

Summary of Contents for ETIC IPL-3G

  • Page 1 IPL-3G UMTS GPRS EDGE IP Router - RAS - firewall _________________ USER GUIDE Document reference : 9019409-01 _________________...
  • Page 2 The IPL-3G router is manufactured by ETIC TELECOM 13 Chemin du vieux chêne 38240 MEYLAN FRANCE TEL : + 33 4-76-04-20-05 FAX : + 33 4-76-04-20-01 E-mail : hotline@etictelecom.com web : www.etictelecom.com User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G...

  • Page 3: Table Of Contents

    Modifying the configuration from the LAN .....................33 Modifying the configuration from the WAN interface ................34 REBOOTING THE ROUTER AFTER PARAMETERS CHANGES................34 RECOVERING THE FACTORY LAN IP ADDRESS....................34 RECOVERING THE FACTORY CONFIGURATION ....................34 ../.. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 3...
  • Page 4 UMTS – GSM-GPRS-3GDGE INTERFACE SET UP....................38 10.1 Modem menu .............................38 10.2 Connection menu............................38 10.3 “Control” menu ............................40 SETTING A CONNECTION TOWARDS THE IPL-3G USING THE DYNDNS SERVICE ..........41 CREATING VPN CONNECTIONS BETWEEN ROUTERS ..................42 12.1 Principles..............................42 12.2 IPSec VPN connections ..........................44 12.3 TLS VPN connections ..........................50...
  • Page 5 Configuring the DNS server ........................91 DIAGNOSTIC & MAINTENANCE DIAGNOSTIC MENU ...............................93 SAVING THE CONFIGURATION TO A FILE......................95 UPDATING THE FIRMWARE ..........................96 Appendix 1 : Management web server description UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 5...

  • Page 7: Security Recommendations

    The IPL-3G uses the UMTS radio network and wireless waves. It is why, it is not possible to guarantee it will connect without interruption. It is not possible to rely only the IPL-3G and the UMTS network to guarantee the security of an automated system.

  • Page 9: Certificate Of Conformity

    CONFORMITY CERTIFICATE OF CONFORMITY The manufacturer, ETIC Telecom – 13 chemin du vieux chêne – 38240 Meylan – France, Hereby declares that the listed products Type of device : UMTS & GSM - GPRS – EDGE router Models: IPL-3G router family conforms to the Council Directive 1999/5/EC related to radio and telecommunication terminal equipments.

  • Page 11: Products Identification

    • • IO Viewer compatible • • • • • • • • VRRP • • • • Masquerading • • • • M2Me_Connect • • • • UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 11...
  • Page 12 • • IO Viewer compatible • • • • • • • • VRRP • • • • Masquerading • • • • M2Me_Connect • • • • User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 12...

  • Page 13: Data-Sheet

    Encryption 3DES Certificate X509 or preshared key 25 VPNs maximum of the same type (TLS or IPSec) Firewall Stateful packet inspection (50 rules) Logs Date and time stamped logs UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 13...
  • Page 14 RS232 or RS485 (2 wires) USB host interface Modbus master and slave Serial Raw TCP client and server asynchronous to IP Telnet gateways RAW UDP “multicast” unitelway *option User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 14...

  • Page 15: Product Overview

    IP gateway, enabling to connect devices directly to the 3G network and the Internet. The IPL-3G is at the same time an IP router, a VPN client or a VPN server, a remote access server (RAS) and a stateful packet inspection firewall.
  • Page 16 3G or GSM-GPRS network. If the IP address assigned to the IPL-3G router by the wireless service provider is not fixed, It is possible to use either the DynDNS service, or the M2Me_Connect service provided by ETIC TELECOM.

  • Page 17: Main Features

    DHCP is a standard Internet protocol that enables a DHCP server to dynamically distribute IP addresses and configuration information to the DHCP clients. The IPL-3G can be a DHCP client or server on its LAN interface or a DHCP client on its 3G (WAN) interface.
  • Page 18 Html and DIP switches configuration The IPL-3G is configured with a web server . Two DIP switches allow to assign an IP address to the IPL-3G over the LAN interface : DHCP client or server, factory IP address or stored IP address.

  • Page 19: Installation

    INSTALLATION Dimensions Dimensions Connectors IPL-3G-X-1220 IPL-3G-X-1230 IPL-3G-X-1400 UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 19...
  • Page 20 8 positions screw terminal : Supply voltage and digital input / output Positio Name Description Power 1 IPL-3G-X-1220 or IPL-3G-X-1220-B : 10 to 30 VDC All other models : 10 to 60 VDC Power 1 Power 2 IPL-3G-X-1220 or IPL-3G-X-1220-B : 10 to 30 VDC...
  • Page 21 (To connect to a DCE to the RS232 port) Positio Circuit Function Not used TD - 103 Data Emission RD - 104 Data Reception Not used SG - 102 Ground Not used Not used Not used UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 21...

  • Page 22: Led Indicators

    Control or replace the antenna or the product itself. Can a communication be set with a mobile phone ? Always ON The router is now connected to the 3G-GSM network User guide ref 99019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 22...
  • Page 23 INSTALLATION UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 23...

  • Page 24: Dip Switches

    Mounting the product on a DIN rail or removing it Mounting the unit on the DIN rail This unit should be mounted on 35 mm DIN-rail, horizontally mounted. Removing the unit from the DIN rail User guide ref 99019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 24...
  • Page 25 INSTALLATION UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 25...

  • Page 26: Cooling

    Cables can be provided to connect the product to DTE and DCE as follows : RS232 cables (L=1m) Code User Cable function connector CAB59 SubD 9 male To connect a DCE to the IPL-3G CAB59 SubD 9 To connect a DTE to the IPL-3G female CAB60 Wires...

  • Page 27: Rs485 Interface

    The antenna must be ordered separately; the models below are available : • 90 ° antenna (ANT210 ). • Magnet mount antenna (ANT211) • Roof antenna (ANT212) UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 27...
  • Page 28 INSTALLATION ANT211 ANT212 (1,50 m) User guide ref 99019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 28...

  • Page 29: Installing The Sim Card

    • If the led lights red, it signifies that the PIN code of the SIM card has not been cleared. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 29...

  • Page 31: Set Up

    Setting up the serial gateway or the USB gateway • Setting up the firewall The IPL-3G router is configured with a PC and an HTML browser. 2 DIP switches enable you to set the IP address : Factory address, stored address, BootP or DHCP client or server.

  • Page 32: Connecting A Pc To The Router For Configuration

    The administration html server is located at the LAN IP address of the router. The default factory address is192.168.0.128. First setup : For the first configuration, we advise to connect the PC directly to the LAN interface of the IPL-3G router. Setup modifications from the LAN or remotely : Modifications can be carried out...

  • Page 33: Modifying The Configuration From The Lan

    If the home page cannot be displayed, refer below. • If the IP @ of the IPL-3G on the LAN interface is assigned by a DHCP server Step 1 : Ensure the DIP switch SW1 is OFF and SW2 ON to select DHCP client operation.

  • Page 34: Modifying The Configuration From The Wan Interface

    • Switch OFF the power supply of IPL-3G router. • Press the push button located on the top part of the IPL-3G router under the lid and, switch-on the power supply. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G...

  • Page 35: Restricting Access To The Administration Server

    Remark : The stored configuration will be lost; the factory IP address 192.168.0.128 will be restored. Restricting access to the administration server When the IPL-3G comes from factory, the html server is not protected by a password. It is advised to protect the access to the administration server with a login and a password.

  • Page 36: Lan Interface Set Up

    Remark about IP addresses assignment rules : The IPL-3G router will be able to route frames between the LAN and the WAN interface only if the IP address assigned to the network connected to the LAN interface is different from the one assigned to the WAN interface.

  • Page 37: Ip Protocol

    Select that checkbox to enable the DHCP server. parameters “IP address pool start” & “IP addresses pool end” That parameters define the range of IP addresses which can be assigned by the IPL-3G to the DHCP client devices. parameters “Netmask” & “default gateway”...

  • Page 38: Umts - Gsm-Gprs-3Gdge Interface Set Up

    Set that option if the provider assigns automatically an IP address to the router through the air interface each time it connects to the 3G or GSM network. Remark : In most cases, and in particular when the Ipl-3G is connected to the Internet, that checkbox must be selected. “IP address” & “netmask” parameter : Enter the fixed IP address and netmask assigned to the router if it not assigned through the air interface.
  • Page 39 SET UP “Source account e-mail address” parameter : Enter the email address attached to the account. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 39...

  • Page 40: Control" Menu

    10.3 “Control” menu The IPL-3G router may not detect that the 3G connection has been cleared ; it is why, the router can send a periodical PING to a particular address. If one that PING does not receive an answer, and after several retries, the 3G connection is reset by the IPL-3G router.

  • Page 41: Setting A Connection Towards The Ipl-3G Using The Dyndns Service

    The DynDNS service is free; but the dyndns domain name can be cancelled if it is not periodically used. The DynDNS service cannot be used to reach the antenna of the IPL-3G router if the IP address assigned to the Ipl-3G router is not a public IP address.

  • Page 42: Creating Vpn Connections Between Routers

    TLS is easier to employ because the transport layer is TCP or UDP; it is why, it can be easily used when the VPN must pass through several or even numerous company routers. Once a type of VPN (TLS or IPSec) has been selected, all the VPN set with the IPL-3G router will be of the same type.
  • Page 43 SET UP To create VPN connections between routers, • select the « Setup» menu and then « Network» and then “VPN connections”. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 43...

  • Page 44: Ipsec Vpn Connections

    The same preshared key value will be used for remote users L2TP / IPSec connections. “Certificate” value The IPL-3G router is delivered with a certificate stored into the product in our factory. To add a certificate, refer to the “Security” menu.
  • Page 45 DPD request message are received from the remote point. ATTENTION : Once the parameters of the IPSEC connection have been selected, click the OK button and then the Save button. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 45...
  • Page 46 If a particular PSK must be used, complete the configuration of the connection as explained below. “Unique PSK for this node” parameter : Select that option if a particular PSK key has to be used for this connection. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 46...
  • Page 47 Paste the field "SubjectAltName" of the active certificate of the router you are configuring and the one the remote router. Attention : For ETIC certificates, this field is the Email field UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01...
  • Page 48 If the key used by the connection is the general PSK entered in the VPN menu, no additional parameter has to be entered. If a particular PSK must be used, carry out the configuration of the connection as explained below. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 48...
  • Page 49 Paste the field "SubjectAltName" of the active certificate of the router you are configuring and the one the remote router. Attention : For certificates delivered by ETIC TELECOM, this field is the Email field. UMTS GPRS EDGE router ref. IPL-3G User guide ref.

  • Page 50: Tls Vpn Connections

    The VPN IP network address field must be different from the WAN network IP address . The number of VPN addresses cannot be greater than 255; the netmask cannot exceed 255.255.255.0. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 50...
  • Page 51 This parameters sets the amount of time (in seconds) the server will wait for the response before repeating it. “Encryption algorithm” & “Authentication algorithm” parameter : That parameters allow to define the encryption and hash algorithms in use. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 51...
  • Page 52 Enter the IP address of the remote router or its DNS name. “Remote WAN IP address” ” parameters : Enter the IP network address and netmask assigned to the remote router over its WAN interface. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 52...
  • Page 53 Enter the IP network address and netmask assigned to the remote LAN. “Common name” parameters : Enter the remote router certificate common name. Attention : For ETIC certificates, this field is the Email field. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01...

  • Page 54: Routing Functions

    Once an iP address has been assigned to the R2 router on the LAN interface and another one on the WAN interface (see drawing hereafter), the IPL-3G R2 router is ready to route frames … … between devices connected to the remote LAN network like RL1, and devices connected to the LAN network like L1 through a VPN;...

  • Page 55: Static Routes

    Enter the destination network IP address and netmask. “Gateway IP address” parameters : Enter the Ip address of the gateway through which the IP packets intended for that network must pass. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 55...

  • Page 56: Rip Protocol

    « Setup» menu, the “Routing” menu and then the “RIP” menu». • Select the ‘ Enable RIP on LAN interface” and the “Enable RIP on WAN interface” options. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 56...

  • Page 57: Address And Port Translation

    The transfer criteria is the port number; the port number is used as an additional address field. When a frame is addressed to the IPL-3G router with a particular registered port, it is transferred to a particular device connected to the LAN interface.

  • Page 58: Advanced Network Address And Port Translation

    PPTP or TLS connection. It applies as well to frames the destination address of which is the IPL-3G router itself or to frames the destination IP address is a device belonging to the LAN subnet, or to the WAN subnet or to another network.
  • Page 59 • Enter the replacement criterion : Source IP address & Destination IP address. Protocol (TCP, UDP, …) Source port & Destination port • Enter the new destination port number and IP address. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 59...
  • Page 60 SET UP User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 60...
  • Page 61 Select “Yes” to enable the rule. • Enter the replacement criterions : Source & Destination IP address. Protocol (TCP, UDP, …) Source & Destination port • Enter the new source IP address. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 61...

  • Page 62: Vrrp Redundancy

    It will use the same virtual IP address and the virtual MAC address as the previous master router. The IPL-3G router manages that protocol as well on the LAN and on the WAN interface. 15.2 Configuring VRRP on the LAN interface To enable and configure VRRP, •...

  • Page 63: Configuring Vrrp On The Wan Interface

    If that option is selected, the elected master router will answer to ARP requests by using that virtual MAC address. That MAC address is 00-00-5E-00-01-XX, where XX is the VRRP Id of the group coded in hexadecimal. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 63...

  • Page 64: Remote Users Connections Service

    SET UP 16 Remote users connections service The IPL-3G provides a full remote user connection function called RAS : • The remote user authenticates using the login, password and eventually a certificate; the router accepts the connection only if the remote user belongs to the user list.

  • Page 65: Remote Users Connections

    • An IP address belonging to the local network is automatically assigned to the remote user’s PC. The IPL-3G manages PPTP and TLS or L2TP remote connections. Only one type can be selected. It will apply to all the remote users connections.

  • Page 66: Configuring A Tls Connection

    Installed on a PC running Windows XP or Seven, M2Me_Secure makes TLS connections from a remote PC to the IPL-3G easy; moreover it includes a connection book in such a way one just need a click to connect to a remote site.
  • Page 67 Select the « Advanced tab » ; select the level 3 protocol (UDP or TCP), the port number and the encryption algorithm. These parameters must have the same values must in the PC and in the router. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 67...

  • Page 68: Configuring A Pptp Connection

    Remark : The “properties” button allows to modify the authentication protocol; leave the default configuration if the PPTP client is a PC running Windows. Step 2 : Set up a PPTP connection on the PC side. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 68...

  • Page 69: M2Me_Connect Service

    IP address. The M2Me_Connect service solves that difficulty : The PC does not connect directly to the IPL-3G; both the PC and the router connect to the “M2Me_Connect” service. Once both parties have been authenticated by the M2Me_Connect service with their own certificate, a TLS VPN is set from end to end from the PC to the IPL-3G router.

  • Page 70: Configuring A M2Me_Connect Connection

    Select the « Connection » tab; select the option “That site can be reached through the Internet and the “M2Me_Connect” option. • Enter the product key of the router; it can be pasted from the “About” menu of the router. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 70...

  • Page 71: Users List

    Storing at least an authorized user in the users list is necessary if a remote user wishes to connect to the IPL-3G with a PPTP or a TLS or a L2TP/IPSec remote user connection. The users list registers 25 authorised remote users forms.
  • Page 72 The IPL-3G will send an email to that address in two situations : Alarm email : the IPL-3G sends an alarm email to the defined user If the input 1 is closed or opened (if that option has been set).

  • Page 73: Firewall

    SET UP Firewall 20.1 Overview The firewall filters IP packets between the WAN and the LAN interface of the IPL-3G router. It is divided in 3 particular filters : • The remote users filters The function of the remote users filters is to limit the IP domain an authenticated remote user can reach when he connects to the IPL-3G router through the Internet.

  • Page 74: Main Filter

    If it does, the decision is applied to the packet according to the “Action” field. If it does not, the firewall checks if it matches the second rule; and so on. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 74...
  • Page 75 SET UP If the packet does not match any of the rules of the table, the default policy is applied to the packet (drop or reject). UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 75...
  • Page 76 : If the value “Accept” is selected, the IP packet will be transmitted to the LAN. If the value “Drop” is selected, the IP packet will be rejected. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 76...

  • Page 77: Remote Users Filters

    A remote user filter is a table of destination port numbers and IP addresses belonging to the LAN network. Once a remote user is connected to the IPL-3G router, the router applies the filter assigned to him (see the remote user form).
  • Page 78 The list of the devices of the LAN network is displayed. • Click « add a device ». • Assign a label and an IP address to the device and click OK. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 78...
  • Page 79 Step 3 : Build a remote user filter • Select the « security» menu, then « firewall» and then «Filter list» The users filters list is displayed. • Click « add a new filter ». UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 79...
  • Page 80 Select a user to which you want to assign a filter ; and click modify ; the user window is displayed. • Assign a filter to the user ; click OK and save. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 80...

  • Page 81: Serial To Ip Gateway

    SET UP 21 Serial to IP gateway That function is available in IPL-3G-1220 or IPL-3G-1230 or IPL-3G-1220B or IPL-3G-1230B The IPL-3G features two serial asynchronous ports RS232 or RS485 (see the product identification table). A serial gateway can be assigned to each port .

  • Page 82: Modbus Menu

    RS232 serial interface. “TCP inactivity Timeout” parameter : Set the time the gateway will wait before disconnecting the TCP link if no characters are detected. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 82...
  • Page 83 “add a link” button; Assign an IP address in front of each modbus slave address with which the serial master device will have to communicate. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 83...

  • Page 84: Raw Tcp Gateway

    (also called server) located on the IP network. The server can be either an ETIC gateway or a PC including a software TCP server. • Select the “transparent” and then the “raw client COM1” or the “raw client COM2” menu .
  • Page 85 Set up the port number the gateway has to use. If the Raw TCP server gateway is assigned to both serial COM ports, the TCP port numbers must be different on each port. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 85...

  • Page 86: Raw Udp Gateway

    Serial data transmitted by each device is transmitted to all other serial devices through the IP network. A table of IP destination gateways is stored in each IPL-3G belonging to the group. The serial data is encapsulated in the UDP protocol.
  • Page 87 SET UP A different UDP port number can be entered for each destination IP address. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 87...

  • Page 88: Usb To Ip Gateway

    If other kinds of traffic have to be forwarded to the USB device, an additional IP address must be assigned the IPL-3G. That address belongs to the network connected to the LAN interface of the IPL-3G. It is the IP address of the USB gateway.

  • Page 89: Advanced Functions

    TELECOOMUNICATIONS acting as a certification authority. That certificate can be used to set a VPN between two routers. Two IPL-3G routers can set a VPN with one another using certificates only if the certificates have been provided by the same authority.

  • Page 90: Configuring The Web Portal

    If the we portal option has been selected (see below), the web portal page is displayed when the remote user launches the navigator and enters the Ip address assigned to the IPL-3G router. In that case, the administration server, usually can be displayed at the same address but at the port number 8080 instead of 80 when the web portal page option is not selected.

  • Page 91: Configuring The Dns Server

    That function can be carried out only if the IPL-3G IP address is pointed out as the main DNS server of the devices of the LAN.

  • Page 93: Diagnostic & Maintenance

    It is the IP address of the PPP server belonging to the 3G network. • VPN sub-menu That menu displays the table of the VPN (remote user connections and remote routers connections) which are established. UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 93...
  • Page 94 The View link displays a window which shows the hexadecimal received and transmitted traffic over each serial COM port. It can be a great help for trouble shooting. User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 94...

  • Page 95: Saving The Configuration To A File

    It is why, we advise to assign a name to a parameter file including the product name and the software version. Example : Name of a parameters file for an IPL-AD2-1220 router with the firmware version V2.4 : Myrouterfile_iplad21220_V241.bin UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 95...

  • Page 96: Updating The Firmware

    A PC with a Web browser. An Ethernet cable or a switch The FTP server software which can be downloaded from the « firmware page » of the ETIC « download area » web server. Step 2 : Download the release of the firmware from our download area to your PC Step 3 : Prepare the PC Check the Ip address of the PC is compatible with the one of the router.
  • Page 97 To update the firmware Firmware update To save or restore a configuration file Save / restore To restore the factory configuration To restart he router Reboot 4/ About menu UMTS GPRS EDGE router ref. IPL-3G User guide ref. 9019409-01 Page 97...
  • Page 98 To display the certificate “product key” To display the firmware version User guide ref 9019409-01 UMTS GPRS EDGE router ref. IPL-3G Page 98...
  • Page 100 13, Chemin du Vieux Chêne 38240 Meylan - France Tel : 33 4 76 04 20 00 Fax : 33 4 76 04 20 01 E-mail : contact@etictelecom.com Web : www.etictelecom.com...

Table of Contents