Change Scsi Settings; Select Console - IBM pSeries 615 Model 6C3 User Manual

Protocol
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. Standard <===
2. IEEE802.3
-------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
-------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Select the ping test option from the network parameters menu to test an adapter's network connection to
a remote system. After the ping test option is selected, the same series of screens will take you through
setting up the IP parameters and the adapter configuration before attempting the ping test.
Notes:
1. After the ping test is initiated, it may take 60 seconds or longer to return a result.
2. If the ping test passes or fails, the firmware will stop and wait for a key to be pressed before
continuing.

Change SCSI Settings

This option allows you to view and change the addresses of the SCSI controllers attached to your system.
SCSI Utilities
1. Hardware Spin Up Delay
2. Change SCSI Id
-------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
-------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _

Select Console

The Select Console Utility allows the user to select which console the user would like to use to display the
SMS menus. This selection is only for the SMS menus and does not affect the display used by the
operating system.
Follow the instructions that display on the screen. The firmware automatically returns to the SMS main
menu.
Note: This option is not available if an HMC is attached. A virtual terminal window on the HMC is the
default firmware console if an HMC is attached.
X = eXit System Management Services
X = eXit System Management Services
Chapter 5. Using System Management Services
73