Jøtul FS 165 - I 400 FL Installation And Operating Instructions Manual page 45

Fig. 8
D
Assemble the stand. The stand consist of bottom plate (Fig.
1.
8 A), 4 legs (Fig. 8 B) and top plate (Fig. 8 C).
2. It is very important that the legs are mounted as shown in
figure 8 D.
3. Place the stand at its final position and make sure a gap of
min. 50 mm to the wall.
The floor and stand has to be completely level (Fig. 8 E).
4.
This is extremely important to ensure that the rest of the
installation is correct.
Fig. 9
1. When using an External air connection (cat. no. 341279), this
has to be fitted now.
C
B
50 mm
A
E
Fig. 10
Bracket 1
Bracket 4
Bracket 5
Fig. 11
1. Fit the first layer of soap stone on the bottom plate. Use
bracket 4 and bracket 6 under to hold them in place.
NB!: Do not use corner stones marked 223628 until layer 4. See
fig. 18.
2. Make sure the layer is level and placed correct on the bottom
plate (Fig. 11 A). Use a rubber mallet to adjust the stones.
3. Place the front stone and corner stones of the second layer
using bracket 1 (Fig. 11 B).
ENGLISH
Bracket 2 Bracket 2
Bracket 3
Bracket 6
B
A
3mm
45