Setting The Air Distribution - Mercedes-Benz S-Class Coupe 2015 Operator's Manual

Operating the climate control systems
136
ically. When the manually set function
switches back to automatic mode, the indi-
cator lamp on the à rocker switch lights
up again.
Adjusting the climate mode settings
In automatic mode you can select the follow-
ing airflow settings for the driver's and front-
passenger areas:
FOCUS high airflow that is set slightly
cooler
MEDIUM medium airflow, standard setting
DIFFUSE low airflow that is set slightly
warmer and with less of a draft
To set: set the climate mode using
X
COMAND (see the separate operating
instructions).
Setting the temperature
General notes
You can set the temperature separately for
the following areas:
front footwells, left and right
R
driver and front passenger area
R
Setting the temperature
Turn the SmartKey to position 2 in the igni-
X
tion lock ( page 147).
Y
To increase/reduce: press the w
X
rocker switch up or down.
or
Set the temperature using COMAND (see
X
the separate operating instructions).
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
Setting the footwell temperature
The footwell temperature for the driver and
front passenger can be set separately using
COMAND (see the separate operating
instructions).

Setting the air distribution

Air distribution settings
¯ Directs air through the defroster vents
P Directs air through the center and side
air vents
O Directs air through the footwell air
vents
S Directs air through the center, side and
footwell vents
a Directs air through the defroster and
footwell vents
W Sets the air distribution to automatic
Setting the air distribution using
COMAND
The air distribution for the left and right sides
of the driver and front passenger area can be
adjusted using COMAND (see the separate
operating instructions).