Deactivating - Mercedes-Benz S-Class Coupe 2015 Operator's Manual

Hide thumbs Also See for S-Class Coupe 2015:
Table of Contents

Advertisement

Activating the HOLD function
Make sure that the activation conditions
X
are met.
Depress the brake pedal.
X
Quickly depress the brake pedal further
X
until : appears in the multifunction dis-
play.
The HOLD function is activated. You can
release the brake pedal.
i
If depressing the brake pedal the first
time does not activate the HOLD function,
wait briefly and then try again.
Deactivating the HOLD function
The HOLD function is deactivated automati-
cally if:
you accelerate and the transmission is in
R
position D or R.
you shift the transmission to position P.
R
you depress the brake pedal again with a
R
certain amount of pressure until ë dis-
appears from the multifunction display.
you secure the vehicle using the electric
R
parking brake.
you activate DISTRONIC PLUS.
R
i
After a time, the electric parking brake
secures the vehicle and relieves the service
brake. The HOLD function is then deacti-
vated.
Driving systems
When the HOLD function is activated, the
transmission is shifted automatically to posi-
tion P if:
the driver's seat belt is not fastened and the
R
driver's door is open
the engine is switched off, unless it is auto-
R
matically switched off by the ECO start/
stop function
The electric parking brake secures the vehicle
automatically if DISTRONIC PLUS is activated
when the vehicle is stationary and:
a system malfunction occurs.
R
the power supply is not sufficient.
R
If a malfunction in the electric parking brake
occurs, then the transmission may also be
shifted into position P automatically.
Magic Body Control
General notes
MAGIC BODY CONTROL consists of Active
Body Control (ABC), ROAD SURFACE SCAN,
the CURVE cornering function as well as auto-
matic vehicle stabilization in the event of a
crosswind.
Your vehicle automatically adjusts its ride
height to reduce fuel consumption. The sus-
pension mode is adjusted according to your
selection (SPORT, COMFORT or CURVE), the
road surface conditions and the vehicle load.
A multifunction camera detects bumps in the
road surface before the vehicle drives over
them. This reduces chassis movements.
Important safety notes
WARNING
G
When the vehicle is being lowered, people
could become trapped if their limbs are
between the vehicle body and the wheels or
underneath the vehicle. There is a risk of
injury.
189
Z

Advertisement

Table of Contents
loading

Table of Contents