Table of Contents
Advertisement
Flat tire
336
Useful information
i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (
Where will I find...?
Vehicle tool kit
General notes
The towing eye is located in the stowage well
under the trunk floor.
i
Apart from certain country-specific varia-
tions, the vehicles are not equipped with a
tire-change tool kit. If the vehicle is equip-
ped with tire-changing tools, these are
located in the stowage well under the trunk
floor. Some tools for changing a wheel are
specific to the vehicle. For more informa-
tion on which tire changing tools are
required and approved to perform a wheel
change on your vehicle, consult a qualified
specialist workshop.
Tools required for changing a wheel may
include, for example:
Jack
R
Wheel chock
R
Lug wrench
R
Ratchet wrench
R
Alignment bolt
R
page 25).
Y
Vehicles with a TIREFIT kit
Example
Tire sealant filler bottle
:
Towing eye
;
Tire inflation compressor
=
Open the trunk lid.
X
Lift the trunk floor upwards (
X
Use the TIREFIT kit (
X
Flat tire
Preparing the vehicle
Your vehicle may be equipped with:
tires with run-flat characteristics
R
(MOExtended tires) (
Vehicle preparation is not necessary on
vehicles with MOExtended tires
a TIREFIT kit (
page 336)
R
Y
Information on changing/mounting a wheel
(
page 377).
Y
Stop the vehicle on solid, non-slippery and
X
level ground, as far away as possible from
traffic.
Switch on the hazard warning lamps.
X
Secure the vehicle against rolling away
X
(
page 166).
Y
If possible, bring the front wheels into the
X
straight-ahead position.
Switch off the engine.
X
page 297).
Y
page 338).
Y
page 337)
Y
Advertisement
Chapters
Table of Contents
