Table of Contents
Advertisement
- Belt is positioned
incorrectly
- Belt is worn or has
oil deposits
- Batteries are low
LCD Display lights
- Microprocessor
up, but not all
hang up
the buttons are
working
- Batteries are low
Cannot connect
- Device is plugged
to Computer
into computer but
no connection
Unit did not
- Device is
record any data
synchronizing, but
no data recorded
Data record is
- Data record is
shown for wrong
shown for wrong
stimulation area
stimulation area
after
synchronization
- Move belt around to
locate your trigger
points
- Clean Conductive
Pads or replace
- Change batteries
- Remove batteries for
1 minute for full RESET
- Change batteries
- Switch off the device.
Take out batteries and
wait for 10 seconds,
insert batteries, switch on
device and connect
again to computer.
- This can happen when
the device time was not
synchronized with the
computer. In this case the
recorded date cannot be
matched with the correct
time and is not displayed
- Please refer to the
manual section
"Recording the
Stimulation Area" on
how to set the correct
stimulation area when
using the device.
27
SYMBOLS
SYMBOL
MEANS
Manufacturer
Date of manufacture
Catalogue number
REF
Direct current
Company: Red Lemon Incorporation
ADD: 19/F, Nan Dao Commercial Building
368 – 381 Queen's Road Central, Hong Kong
Tel: +852-3694 0110
Fax: +852-2515 3995
Web: www.red-lemon.net
Email: info@red-lemon.net
Made in China. Designed and Engineered in Germany.
SYMBOL
MEANS
Authorized
representative
in the European
Community
CAUTION
SN number
SN
Type BF Applied
Part
28
Advertisement
Table of Contents
