ab command iX2 Instruction Manual page 10

ATTENTION:
• The unit will NOT work without a conductive medium between your
skin and the conductive area of the belt! To guarantee the best results
in the fastest time use ONLY the specially formulated AbCommand™
iX2™ Conductive Gel. This gel is water-based.
• DO NOT USE gels or creams that contain oils! Oil-based gels can
contain ingredients that react badly with the Conductive Pads of your
belt and could reduce the lifespan and efficiency of the belt significantly.
8. We recommend starting with the upper abs, placing the belt above
your belly button.
9. Switch the unit on by pressing the ON/OFF
The LCD display will light up.
COMPUTER SYNCHRONIZATION
The AbCommand™ iX2™ lets you record, synchronize, monitor,
evaluate and share your training goals and results online at
www.MyAbCommand.com.
FIRST SYNCHRONIZATION
The unit should be set up with your computer before your first operation
to ensure data is tracked properly. Please visit www.MyAbCommand.com
for instructions on setting up the device.
Please connect the provided USB cable to your computer (the
AbCommand™ iX2™ works on Microsoft Windows operating system
versions XP, Vista, and 7/8) and follow the instructions to set up your user
account and synchronize the computer time with the AbCommand™
iX2™ system.
The unit will work without synchronization, but data recording will be
disabled.
After the USB connection is established, the USB icon
indicating the connection is established successfully.
button once.
will be lit
17
Please follow the on-screen instructions on your computer to synchronize
and disconnect the unit.
You can start using and enjoying the full benefits of your unit after
synchronization.
DATA RECORDING
The unit will record your training data on the device for later synchronization
and evaluation online.
After synchronization, the data recording is automatic. Please synchronize
your data to your online user account every 7 days or after 3 hours of
use, which ever is earlier.
Data will only be recorded after 10 seconds of continuous operation
without changes to mode or intensity.
CONTROLLER OPERATION
Use the M button to toggle through the menu:
Mode
Intensity
Timer
Target Area
18