Installing the harness system
F26
1.
Place the cover on the shell and fit is around the frame. Leave
the bottom part of the cover loose.
Installing the lap belts
2. Pull the lap belt anchor clip (F26)(C) through the belt clip slot
(F26)(1) or (2). Anchor the clip by threading it through the
anchor slot (which goes back through the seat) and lodging it
horizontally so the slip can't pass through the slot.
Installing the buckle
3. Thread the anchor clip (F26)(D) through the buckle clip slot (the
reverse action of F25 on previous page). Anchor the clip in the
anchor slot ensuring it cannot be pulled through.
designed in NZ
18