Data Dump Mode - WeP LQ540DX User Manual

RED
GREEN
ORANGE
No Colour (One Beep)
No Colour (Two Beep)

DATA DUMP MODE

Press FONT and POWER on, to enter data dump mode. This mode prints
printable test in ASCII format, which can be used for debugging. This mode
will stay till you switch OFF the printer.
BI_D VERTICAL LINE ADJUSTMENT PROCEDURE
This BI_D adjustment is useful to make the vertical line alignment. The
following steps show you how to do the BI_D adjustment.
1. Press PITCH and Power on, to enter into BI_D adjustment mode.
2. Press LF/FF to decrement the bidi count & FONT to increment the bi_di
count.
3. Press ONLINE to execute the changes.
4. Press PITCH to select different SPEEDS.
a. SPEED 0 for DRAFT.
b. SPEED 3 for LQ (fonts).
5. Switch off the printer to save the changes.
10
12
15
17
20
22