Character Fonts; Character Spacing - WeP LQ540DX User Manual

BUFFER CLEAR / PANAL RESET
Hold down the LF/FF, FONT & PITCH buttons together till printer gives BEEP
sound. The printer buffer gets cleared and the default printer settings are loaded.
SELECTING TYPE STYLES
The printer can produce several type styles by using different fonts, character
spacing and other print enhancement features. You can select typestyles in 2
different ways: by using software commands or by using the control panel.
This section describes how to select a typestyle using the FONT, PITCH buttons
on the control panel.

Character Fonts

FONT
The LED colour shows the present font (Character Per Inch) selected of the
printing. Press the FONT button to change the LED colour. The following table
shows the LED colour Vs FONT setting.
LED Colour
RED
GREEN
ORANGE
No Colour (One Beep)
No Colour (Two Beep)
No Colour (Three Beep)

• Character Spacing

PITCH
The LED colour shows the present pitch (Character Per Inch) selected of the
printing. Press the PITCH button to change the LED colour. The following table
shows the LED colour Vs PITCH setting.
LED Colour
FONT
DRAFT
ROMAN
SCRIPT
PRESTIGE
COURIER
SANSERIEF
PITCH (CPI)
21