Paper Handling - WeP LQ540DX User Manual

PAPER HANDLING

* Using single sheets (Friction mode)
* Using continuous sheets (Tractor mode)
* Switching between continuous and single sheets
* Printing on special paper
USING SINGLE SHEETS (Cut sheet i.e., Friction mode)
Loading a sheet
1. Turn on the Printer
2. Hold the paper rack upright and insert the rack into the slant grooves on both
sides of the printer so the hook-shaped tabs face upward. Then place it in the
slant position.
3. Move the friction lever to the cut sheet position (toward the back of the
printer).
4. Slide the left and right paper guides to their extremes.
5. Position the cut sheet paper such that it leans against the paper rack.
CHAPTER 2
10