Using The Printer; Operating The Control Panel - WeP LQ540DX User Manual

USING THE PRINTER

• Operating the control panel

• Printer setting through the front panel
• Adjusting the TOF position
• Online micro-feed
• Buffer clear / Panel Reset
• Selecting type styles
• Data dump mode
• BI_D Vertical line adjustment
OPERATING THE CONTROL PANEL
LEDs
POWER ON (green)
ON - when the power switch is on and power is supplied to the printer.
PAPER OUT (red)
ON - when the paper is not present or when continuous paper is in the standby
position.
ONLINE / TOF (green)
ON - when the printer is on line and ready to receive data. Flashes when the
micro adjustment feature is enabled as soon as paper is loaded to set top of
form.
PITCH (Tricolour)
The LED colour shows the present pitch (Character Per Inch) selected of the
printing. Press the PITCH button to change the LED colour. The following table
shows the LED colour Vs PITCH setting.
LED Colour
RED
GREEN
ORANGE
No Colour (One Beep)
No Colour (Two Beep)
CHAPTER 3
PITCH (CPI)
10
12
15
17
20
17