Add/Remove Camera; Camera Information - Bosch DCN-SWSACC Software Manual

Dcn standalone automatic camera control
Table of Contents

Advertisement

14
en | Cameras
Number of audience screens:
This selection allows you to select the Number of audience screens:. The Number of
audience screens: (excluding the operator screen) can be set from 1 till 4. All audience
screens show the same picture.
NOTICE!
It is recommended that the number selected corresponds to the actual number of audience
screens present in the venue. If the number selected is higher than this, there may be some
reduction in system performance.
5.3

Add/Remove camera

NOTICE!
Add/Remove camera is disabled when the Camera System Type is set to AutoDome
Add a new Camera
A new camera is added to the Section 3.1.3 Configuration list (3). Select the new camera
which allows you to enter the Section 5.4 Camera Information. The add camera option is
disabled when no free camera numbers are available.
Remove a selected camera
This option is always disabled when the Section 5.2 Camera Control Settings is visible since no
camera is selected.
5.4

Camera Information

By selection of the Camera System Type in the Section 3.1.3 Configuration list (3) the Camera
Information option becomes visible and allows you to view, select and change the assigned
cameras settings.
Camera name:
This text box allows you to enter 16 characters to define the Camera name:.
Camera number:
This is the number of the camera.
NOTICE!
This camera number must correspond with the internal address of the camera. Refer to the
camera user manual how to change the internal address.
Movable camera
Cameras used in camera control systems can be either fixed or moveable. This check box
allows you to determine if a moveable camera (check box is selected) or none moveable
camera (check box is deselected) is connected.
Number of prepositions:Number of prepositions:
Fixed cameras cannot automatically adjust their positions. Moveable cameras, such as
AutoDome cameras, can automatically adjust their positions (called Preposition:). This text
box allows you to enter or change the number of camera prepositions for each assigned
camera as defined in Section 6.1.3 Assigning cameras and prepositions to a unit. A maximum of
99 camera prepositions are allowed.
DCN-SWSACC_V4.0 | V1.0 | 2011.10
Software Manual
Bosch DCN Standalone Automatic Camera
Bosch Security Systems B.V.
Control

Advertisement

Table of Contents
loading

Table of Contents