Bosch DCN-SWSACC Software Manual page 19

Bosch DCN Standalone Automatic Camera
Control
7 Upload
This workflow describes Uploading the configuration to the DCN system.
To do so:
1.
2.
NOTICE!
The Start upload button is disabled if the Section 4.1 PC Communication Settings for the DCN
System is set to --None-- .
If the Upload process cannot start the window text changes into: Upload failed. and the
progress bar will be hidden.
Failures could be:
–
–
–
If the Upload process failed the window text changes into: Upload failed. and the progress
bar remains on the last value.
Failures could be:
–
Bosch Security Systems B.V.
Click the Start upload button.
– The window text is changed into Uploading the configuration to the DCN system.
– The Start upload button, File (except Exit), Tools menu and Workflow buttons are
disabled.
– The progress bar is visible and gives the visual indication about the progress of the
upload.
When the Upload process is successfully completed:
– The window text is changed into Upload successfully finished., the progress bar is
set to 100% and the Start upload button, menu items and Workflow buttons are
enabled.
Unable to set up the connection.
Incompatible version of the DCN system.
Missing camera control authorization.
Lost of connection with the DCN system.
Software Manual
Upload | en
DCN-SWSACC_V4.0 | V1.0 | 2011.10
19