2020 Inverter Card - IBM ThinkPad Dock II Hardware Maintenance Manual

Removing and replacing a FRU

2020 Inverter card

For access, remove these FRUs in order:
v "1010 Battery pack" on page 68
v "1030 Hard disk drive" on page 70
v "1050 Keyboard" on page 73
v "1080 Bluetooth/Modem daughter card
(BMDC/BMDC-2)" on page 80
v "1090 Keyboard bezel" on page 82
v "1100 Mini PCI adapter" on page 86
v "1180 LCD assembly" on page 105
v "2010 LCD front bezel" on page 119
1
2
3
When installing: Make sure that connectors 2 and 3
are firmly attached.
Cable routing: When replacing the inverter card, route
the connector cable as in this figure:
121
ThinkPad R50/R50p and R51 Series