System Connections - Sharp XL-DV75HMKII Operation Manual

System connections

Make sure to unplug the AC power lead before making any connections.
FM aerial
(commercially
available)
To subwoofer
(not
input socket
supplied)
To
component
video input
sockets
To video
(supplied)
input
socket
(not supplied)
To HDMI
input
socket
(commercially
available)
To S-video input
socket
To coaxial digital audio
input socket
■ Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM ANTENNA 75 OHMS
socket and position the FM aerial wire in the direction
where the strongest signal can be received.
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
P
P B R
(commercially
available)
To audio output
sockets
Right speaker
75 ohms
coaxial cable
External FM aerial
(not supplied)
(commercially
available)
■ External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
Note:
When an external FM aerial is used, disconnect the
supplied FM aerial wire.
8
To SCART
input socket
Wall socket
(AC 220 - 240 V ~
50/60 Hz)
Red Black
Left speaker