Table of Contents
Advertisement
System connections
DV-AT4000
Caution:
Turn off all other equipment before making this connection.
" Digital connection to a surround amplifier,
etc.
Connect the unit to a DTS digital surround amplifier, etc. to enjoy DVD/CD sounds
through other equipment.
Digital audio cable
(supplied)
Dolby Digital/DTS amplifier etc.
12
TV
(Connecting to a TV,
refer to 13 -14 pages.)
Audio signal
To
coaxial digital
audio input jack
" Digital connection to a digital audio
recorder, etc.
Digital audio recorder, etc.
Selecting a sound signal type
When connecting other equipment to an optical
digital audio output, adjust the audio output set-
ting accordingly (see page 17).
Bitstream
When the unit is connected to a processor or
amplifier that supports Dolby Digital (5.1ch).
LPCM
When the unit is connected to the 2-channel
audio equipment or an MD recorder, the Dolby
Digital does not function.
Audio signal
Optical digital cable
(commercially available)
To the optical
digital
audio input jack
Control Panel
Audio
Digital Output
BitStream
LPCM Output
48 kHz
Setup Usage: Press ARROW keys to move, ENTER key
to change, MENU key to exit.
Advertisement
Table of Contents
