Related Manuals for Microh LED HALO BEAM710
Summary of Contents for Microh LED HALO BEAM710
-
Page 1: User Manual
LED HALO BEAM710 40°C 150°C 0.2m User Manual KEEP THIS MANUAL FOR FUTURE NEEDS... -
Page 2: Safety Instructions
SAFETY INSTRUCTIONS CAUTION Becareful with your operations.With a dangerous voltage you cansuffer a dangerous electric shock when touching wires! This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. - Page 3 Meanwhile, please keep this manual well for future needs. MICROH’s LED HALO BEAM710 is made of a new type of high temperature strength of engineering plastics and cast aluminum casing with nice outlook. The fixture is designed and manufactured strictly following CE standards, complying with international standard DMX512 protocol.
-
Page 4: Features And Specifications
FEATURES & SPECIFICATIONS Features • 7PCS OSRAM LE RTDUW S2W 4-IN-1 15W LEDs. • 50,000 hours life span for LEDs and low power consumption • Intelligent temperature sensor for LEDs(over heat protection) • High efficiency 8 degree optic lens • Color range with 16.7 millions additive RGBW colors •... -
Page 5: Photometric Data
PHOTOMETRIC DATA Photometric Beam Angle Data × 8°Beam Angle LUX 0.0929=FC 1379 / 14840 218 / 2350 80 / 858 41 /446 1970 / 21200 339 / 3652 129 / 1386 68 / 732 2408 / 25920 391 / 4210 148 / 1595 76 / 823 2640 / 28420... -
Page 6: Installations
OPERATION INSTRUCTIONS · The moving head is for beam effect for on-site decoration purpose. · Don’t turn on the fixture if it’s been through severe temperature difference like after transportation because it might damage the light due to the environment changes. - Page 7 Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet. Clamp Mounting: The LED HALO BEAM710 provides a unique mounting bracket assembly that integrates the bottom of the base, and the safety cable rigging point in one unit (see the illustration below).
-
Page 8: Dmx-512 Control Connections
Regardless of the rigging option you choose for your LED HALO BEAM710 , always be sure to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as illustrated above. Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle. -
Page 9: Menu Operations
COMMON 1:Ground DMX+ 2:Data(-) 3:Data(+) DMX- DMX512 OUT DMX512 IN DMX Output DMX Input 3-PIN XLR 3-PIN XLR 3-Pin XLR Socket 3-Pin XLR Socket For installations where the DMX cable has to run a long distance or is in an electrically noisy environment, such as 120 Ω... -
Page 10: Dmx Channels
DMX CHANNELS Channel Function Value Description 0-255 PAN Movement Pan Fine 0-255 Fine control of Pan movement Tilt 0-255 Tilt Movement Tilt Fine 0-255 Fine control of Tilt movement Dimmer 0-255 0-100% Linear dimmer from dark to bright Strobe 0-255 Strobe effect from slow to fast 0-255 0-100% red dimmer from dark to bright... -
Page 11: Maintenance And Cleaning
MAINTENANCE AND CLEANING The following points have to be considered during the inspection: 1) All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded. 2) There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling, suspension, trussing).