Dmx-512 Control Connections - Microh LED HALO BEAM710 User Manual

Regardless of the rigging option you choose for your
sure to secure your fixture with a safety cable. The fixture provides a built-in rigging
point for a safety cable on the hanging bracket as illustrated above. Be sure to only
use the designated rigging point for the safety cable and never secure a safety cable
to a carrying handle.

DMX-512 CONTROL CONNECTIONS

7
Connect the provided XLR cable to the female 3-pin XLR output of your controller and
the other side to the male 3-pin XLR input of the moving head. You can chain multiple
Moving head together through serial linking. The cable needed should be two core,
screened cable with XLR input and output connectors. Please refer to the diagram
below.
DMX-512 connection with DMX terminator
Power Switch
POWER IN
POWER OUT
POWER IN
DMX IN
LED HALO BEAM710
.07.
, always be
DMX IN
DMX OUT
Fuse