System Setup
Item
When this option is On, you can wake up the machine
from the power saving mode with the following
actions:
Wakeup Event
• Loading paper in a tray.
• Opening or closing the front cover.
• Pulling a tray out or pushing a tray in.
Turns power off automatically when the machine has
been in power save mode for the length of time set in
Auto Power Off > On > Timeout.
Auto Power Off
Optimize print quality according to the machine's
Altitude Adjustment
altitude (see "Altitude adjustment" on page 189).
Description
• To turn the machine on again, press the
(Power) button on the control panel (make
sure the main power switch is on).
• If you run the printer driver or
Samsung Easy
Printer
Manager, the time automatically
extends.
• While the machine is connected to the
network or working on a print job,
Power Off
feature doesn't work.
Item
Vapor Mode
Paper Stacking
Auto
Humidity
Job Timeout
Description
You can reduce the amount of water vapor produced
during printing.
• On: Enables vapor mode.
• Off: Disables vapor mode.
• Auto: Automatically enters vapor mode according
to time in high humidity environments.
Enabling the Vapor Mode option can make the
printing speed slower.
If you use a machine in a humid area, or you are using
the damp print media caused by a high humidity, the
print-outs on the output tray may be curled and may
not be stacked properly. In this case, you can set the
machine to use this function to let print-outs stacked
firmly. But, using this function will make the print speed
slow.
Optimizes print quality according to the humidity in the
environment.
When there is no input for a certain period of time, the
machine cancels the current job. You can set the
amount of time the machine will wait before canceling
the job.
3. Useful Setting Menus
177