Samsung ProXpress C262x Series User Manual page 150

Wireless network setup
12 If your printer supports Wi-Fi Direct and this function is disabled, its
corresponding screen will appears.
If you want to enable Wi-Fi Direct, check the checkbox, and click Next. If
not, click just Next.
• Can start to build Wi-Fi Direct by using
(see "Setting up Wi-Fi Direct" on page 153).
• Wi-Fi Direct Name: The default Wi-Fi Direct Name is the model name
and the maximum length is 22 characters.
• Password setting is the numeric string, and the size is 8 ~ 64 characters.
When the wireless network settings are completed, disconnect the USB
13
cable between the computer and machine.
Wireless network set up is completed. After the installation is finished,
14
click Quit.
Samsung Easy Printer Manager
After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installation for Mac" on
page 121).
18
Using a network cable
Machines that do not support the network port will not be able to use this
feature (see "Rear view" on page 19).
Your machine is a network compatible machine. To enable your machine to
work with your network, you will need to perform some configuration
procedures.
• After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installing driver over
the network" on page 130).
• See your network administrator, or the person that set up your wireless
network, for information about your network configuration.
2. Using a Network-Connected Machine
150