Samsung ProXpress C262x Series User Manual page 38

Media and tray
Transparency
• In case of color printing using transparencies, the picture quality would
be lower than mono printing when the printouts are used on the
overhead projector.
• Prints made on transparency film with this machine are not compatible
with overhead projectors and may appear as a black and white image if
projected.
To avoid damaging the machine, use only transparencies designed for use in
laser printers.
CLP-68xND Series/ CLP-68xDW Series
• Must withstand the machine's fusing temperature.
• Place them on a flat surface after removing them from the machine.
• Do not leave unused transparencies in the paper tray for long. Dust and dirt
may accumulate on them, resulting in spotty printing.
• To avoid smudging caused by fingerprints, handle them carefully.
• To avoid fading, do not expose printed transparencies to prolonged
sunlight.
• Ensure that transparencies are not wrinkled, curled, or have any torn edges.
• Do not use transparencies that separate from the backing sheet.
• To prevent transparencies from sticking to each other, do not let the printed
sheets stack up as they are being printed out.
• Recommended media: Transparency for a color laser printer by Xerox, such
as 3R 91331(A4), 3R 2780 (Letter).
2. Menu Overview and Basic Setup
38