Table of Contents
Advertisement
6215 Equinox 1200 UG
Select base
You can switch your BT Equinox handset between bases.
You can also set it to automatically select the base with
the strongest signal. The handset must first be registered
with each base individually.
1. Press
MENU
then scroll
2. Scroll
to
Select Base
base being used is highlighted.
3. Scroll
or
to connect to the base with the strongest signal. Press OK.
De-register a handset
Use one handset to de-register another handset from the
same base.
1. Press
MENU
then scroll
2. Scroll down to
3. Enter the system PIN (original setting 0000) then press
OK. The screen lists all handsets registered to the base.
4. Scroll
or
deregister and press OK.
5. Press
YES
to confirm or
screen listing the handsets.
9/6/04
11:27 am
BT Equinox 1200 – Edition 6 – 28.05.04 – 5757
to
Registration
then press OK. The current
to select the base you want or
to
Registration
De-Register
. Press OK.
to select the handset you want to
BACK
to return to the previous
Page 67
Additional handsets and bases
and press OK.
Automatic
and press OK.
67
Advertisement
Table of Contents
