Installer/Configuration Menu - Daikin 910121750 Installation Operation & Maintenance

Installer/Configuration Menu

To enter the configuration menu: Press the Menu touch key. Press and hold for 5 seconds the Installer Config touch key. This dis-
plays screen reference #1 in the table below. Screen Reference numbers appear in top right corner of display. Press
to the next menu item or
available if selected for Non-Programmable.
Screen
HP1 Press
Reference
HP2 Key
Number
●
1
●
2
●
3
●
4
●
5
●
6
●
7
8 ●
●
9
●
10
●
11
●
12
●
13
●
14
●
15
●
16
●
17
18 ●
●
19
●
20
●
21
●
22
●
23
●
24
●
25
●
26
●
27
28 ●
●
29
●
30
●
31
●
32
●
33
●
34
●
35
to return to a previous menu item. Press
Displayed Factory
Press
(Default)
from listed options
HP2
Days, (7) P
(4) PS
Cool-Off-Heat,
Cool-Off-Heat-Auto
(On) E
(FA) Heat, Cr
(FA) Cool, Cr
(FA) AU/Cr
(OFF) CL
(On) dL
0 (Temperature) 5, LO to 5, HI
°F
(On) b
(On) ds
(On) Heat, AS
(On) Cool, AS
(OFF) CS
CS Cool Savings (3)
(99) Heat, HL
(45) Cool, LL
L (total), P (partial),
Temperature Limit
OFF, Keypad Lockout
(limited temperature range)
000
(On) Heat, FS
(On) Cool, FS
Remote (OFF)
Remote, in Outdoor Remote
(On) LS
(80) AO
dM
(OFF) Hd
Humidity 00
-18 LO, 20 HI
(Room Humidity)
(OFF) Change UV Lamp
350 Days
OFF Change Filter
200 Hrs
or to change a menu item option. Shaded items are not
or to select
Selects Heat Pump 1 (HP1, 1 compressor), Heat Pump 2
HP1
5 or 0 Programs per week. (7 days, 5-1-1 days or non-programmable)
2
4 = Morning, Day, Evening, Night, 2 = Day, Night, Not available if 4 is 0
Off-Auto
OFF Selects Energy Management Recovery. Not available if 4 is 0
SL
SL
SL Selects Adjustable Anticipation, cycle rate auxiliary
On
OFF
Selects Adjustable Ambient Temperature Display {range -5 (LO) to +5 (HI)}.
°C Selects °F/°C Display (temperature units in Fahrenheit or Celsius)
OFF
OFF
Selects Automatic Schedule for comfort temperature
OFF
Selects Automatic Schedule for comfort temperature
OFF
On
Selects amount of Cool Savings adjustment.CS will not be displayed if CS
1-2-3-4-5-6
TEMPERATURE LIMIT, HEAT (max. heat set point). The limit can be
62-98
TEMPERATURE LIMIT, COOL (min. cool set point). The limit can be
46-82
Selects Keypad Lockout Combination (active only if keypad Lockout is
001-999
OFF
OFF
On
Local temp. Sensor enable/disable (only when Indoor Remote is
OFF
Selects Auxiliary Heat cut-out temperature. This item appears if outdoor
-5 – 79
Selects dehumidification or economizer thermostat option
dM and EC
On
On
25–1975
On
25–1975
Comments
(HP2, 2 compressor or 2 speed compressor)
Programs per day.
System switch configuration
Selects Adjustable Anticipation, cycle rate, Heat
Selects Adjustable Anticipation, cycle rate, Cool
Selects Compressor Lockout
Selects Continuous Display backlight.
Selects audible Beeper On/Off.
Selects Daylight Saving Time calculation.
programming, heat mode. Not available if 4 is 0.
programming, cool mode. Not available if 4 is 0.
Selects Cool Savings Feature On or Off.
is Off
adjusted up to 99°
adjusted down to 45°
Selects Keypad Lockout.
selected)
Fast second stage of heat
Fast second stage of cool
Remote temperature sensor, enable/disable
Remote temperature sensor (Indoor/Outdoor)
selected On)
sensor is installed and enabled
Selects Humidity Display alternate with time
Selects Humidity Display adjustment
Selects Change UV Lamp feature
Change UV Lamp duration days
Selects Change Filter feature
Selects Change Filter feature
IOM 1178-1 / Page 7 of 16
to advance