Honeywell HY-200 Series Owner's Manual page 5

CONTROLLING THE FEBREZE SCENT
®
Once the Febreze Set&Refresh scent cartridge is properly
® ®
Scent Control
installed, use the Febreze Scent Control Dial located on the
®
top of the Fan control panel (Fig. 4), to control the amount of
scent released into the air.
Turn the Febreze Scent Control Dial clockwise to release
®
increasing amounts of Febreze scent into the air.
®
Keep the Scent Control Dial in the LOW position if you want the
minimum amount of Febreze scent to be released into the air
®
Fig. 4
and circulated by your fan.
Turning the Febreze Scent Control Dial all the way to the right (MAXIMUM) will release the
®
maximum amount of Febreze scent into your room.
®
PLEASE NOTE:
The speed at which you run your Honeywell with Febreze Freshness™ Cool & Refresh Fan
does affect the length of time your Set&Refresh scent cartridge will last.
®
®
An installed and activated Set&Refresh scent cartridge will empty faster if you run your
fan at HIGH speed instead of LOW speed.
If you regularly run your fan at LOW speed while a Set&Refresh scent cartridge is
®
installed and activated, the Set&Refresh scent cartridge will last longer.
®
To operate the fan without any scent, simply remove the scent cartridge from the fan.
Febreze Set&Refresh scent cartridges are available in a variety of scents wherever
® ®
Set&Refresh products are sold. Click on the 'Buy Now' link on www.Febreze.com to locate a
®
retailer near you.
CAUTION: EYE IRRITANT. Avoid contact with eyes. Do not put fingers into product vent. Wash
hands after handling perfume cartridge.
KEEP OUT OF REACH OF CHILDREN AND PETS. FIRST AID TREATMENT: Contains fragrance
oils. If eye contact occurs, rinse with plenty of water for 20 minutes. If eye irritation persists,
consult a physician.
IF SWALLOWED; do not induce vomiting, call a physician or poison control center immediately.
- 5 -