Black & Decker LST136 Instruction Manual

Black & Decker LST136 Instruction Manual

40v max* lithium trimmer/edger
Hide thumbs Also See for LST136:
Table of Contents

Advertisement

Available languages

Available languages

40V MAX* LiTHiUM TRIMMER/EDGER
iNSTRUCTiON MANUAL
IVlodel Number
LST136
PLEASE
READ BEFORE
RETURNING
THIS PRODUCT
FOR ANY REASON:
If you have a question or experience a problem with your
Black & Decker purchase, go to
WWW.BLACKANDDECKER.COM/INSTANTANSWERS
for instant answers 24 hours a day.
If you can't find the answer or do not have access to the internet,
call 1-800-544-6986
from 8 a.m. to 5 p.m. EST Mort. - Fri
to speak with an agent.
Please have the catalog number available when you call.
SAVE THiS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA.
POUR LE FRAN(_AIS, VOIR LA COUVERTURE
ARRIERE.
DE OPE.RACION, CENTROS DE SERVICIO
INSTRUCTIVO
Y POLIZA DE GARANTIA. ADVERTENClA:
LEASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a
workload) is 40 volts. The nominal voltage is 36.
IVlodel # LST136
KEY iNFORMATiON
YOU SHOULD
KNOW:
• The guard
must be installed
before trimming
or edging = if
not, the motor will overheat
(page 8).
• When replacing
the line, use only .065 inch diameter
ROUND
line (B&D Model #AF-100
is recommended)
-
otherwise
the tool will not function
properly
(page 11).
• Do not bump the feed head against
the ground
- it will
disrupt the feed mechanism.
• For use only with LB series 36v or 40v Max* batteries.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LST136 and is the answer not in the manual?

Questions and answers

Patricia Patterson
June 15, 2025

How to remove battery

1 comments:
Mr. Anderson
August 19, 2025

To remove the battery from a Black & Decker LST136:

1. Press the battery release button located on the back of the battery pack.
2. Pull the battery pack out of the tool.

This answer is automatically generated

Table of Contents

Save PDF