Sony MEX-BT5000 Service Manual page 10

MEX-BT5000
(E)
Location of controls and basic operations
Audio function
Main unit
1 2 3
7 8 9
Front panel removed
qd
Card remote commander RM-X303
7
1
ql
qh
w;
3
4
9
qj
wa
qs
ws
qk
wd
10
4 5 6
MEX-BT5000
0 qa qs
qf qg
RESET
J Frequency select switch (located on the
bottom of the unit)
See "Frequency select switch" in the
supplied installation/connections manual.
K Number buttons
CD/MD* 1 :
(1): REP
(2): SHUF
(5): BBE MP* 6
To activate the BBE MP function, set
"BBE MP on." To cancel, set "BBE MP
off."
(6): PAUSE*
6
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
L DSPL (display) button
To change display items.
M Disc slot
To insert the disc.
N RESET button
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A SOURCE button
To power on; change the source (Radio/CD/
MD* 1 /Bluetooth AUDIO/AUX).
B Joystick/LIST button
Rotate to: Adjust the volume.
Push up/down/left/right to: Select a menu
item.
Press to: Apply a setting.
CD/MD* 1 :
Push up/down to* 2 :
− Skip groups*
3 /albums* 4 (push).
− Skip groups*
3 /albums* 4 continuously
(push and hold).
Push left/right to:
− Skip tracks (push).
− Skip tracks continuously (push, then push
again within about 2 seconds and hold).
− Reverse/fast-forward a track (push and
hold).
O Z (eject) button
To eject the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
qh ENTER button
To apply a setting.
qj LIST button
To list up.
qk Number buttons
Buttons 1 to 6 share the same functions as
the number buttons on the unit.
ql M (+)/m (–) buttons
The same as pushing the joystick up/down.
w; < (.)/, (>) buttons
The same as pushing the joystick left/right.
wa SOUND button
To select sound items.
ws ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
Radio:
Push up/down to:
− Receive stored station.
Push left/right to:
− Tune in stations automatically (push).
− Find a station manually (push and hold).
Press to:
− Display the list.
C MODE button
To select the radio band (FM/AM)/select the
unit* 5 .
D MENU button
To enter menu.
E Display window
F OPEN button
G OFF button
To power off; stop the source.
H Receptor for the card remote
commander
I SCRL (scroll) button
To scroll display item.
wd VOL (volume) +/– buttons
To adjust volume.
*1 When an MD changer is connected.
*2 If the changer is connected, the operation
is different.
*3 When an ATRAC CD is played.
*4 When an MP3/WMA is played.
*5 When a CD/MD changer is connected.
*6 When playing back on this unit.
Note
If the unit is turned off and the display
disappears, it cannot be operated with the
card remote commander unless (SOURCE) on
ithe unit is pressed, or a disc is nserted to
activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card
remote commander".