Sony MEX-BT5000 Service Manual page 11

Bluetooth function
Main unit
1 2 3
6 7 8
Front panel removed
qa
Card remote commander RM-X303
7 3
6
1
qg
qs
qh
4
qd
qj
qf
qk
4 5
MEX-BT5000
9 0
RESET
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
qs ENTER button
To apply a setting.
qd Number buttons
To input numbers (phone number, passcode,
etc.).
Buttons 1 to 6 share the same functions as
the number buttons on the unit.
qf
button
qg M (+)/m (–) buttons
The same as pushing the joystick up/down.
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A SOURCE button
To power on; change the source (Radio/CD/
MD* 1 /Bluetooth AUDIO/AUX).
B Joystick
Rotate to: Adjust the volume.
Push up/down/left/right to: Select a menu
item.
Press to: Apply a setting.
Bluetooth audio device* 2 :
Push left/right to:
− Skip tracks (push).
− Reverse/fast-forward a track (push and
hold).
C Bluetooth button
To access the Bluetooth functions; receive a
call.
qh < (.)/, (>) buttons
The same as pushing the joystick left/right.
qj VOL (volume) +/– buttons
To adjust volume.
qk
button
*1 When an MD changer is connected.
*2 When a Bluetooth audio device (supports AVRCP
of Bluetooth technology) is connected. Depending
on the device, certain operations may not be
available.
MEX-BT5000
D MENU button
To enter menu; receive a call.
E Display window
F OFF button
To power off; stop the source; end or reject a
call.
G CALL button
To access the telephone functions; receive a
call.
H Receptor for the card remote
commander
I Number buttons
To call stored dials.
Bluetooth audio device* 2 :
(6): PAUSE
To pause playback.
J Bluetooth indicator
Lights up when the Bluetooth signal is input/
output. Goes off when the Bluetooth signal is
off.
K Microphone
Note
If the unit is turned off and the display
disappears, it cannot be operated with the
card remote commander unless (SOURCE)
on the unit is pressed, or a disc is inserted
to activate the unit first.
Tip
For details on how to replace the battery,
see "Replacing the lithium battery of the
card remote commander".
11